Product
Overview
Type
804 makes use of a stainless steel woven mesh element
fabricated in to a tubular construction and sized to
give an effective surface area equivalent to that of
the bore of the inlet pipe.
•
Pressure drop through the filter when fully cleaned
is less than 0.1 barG (2psi) at full flow conditions.
• Available
in 6 different sizes ranging from DN 6 to 50 (1\4"
to 2").
• Maximum
operating differential pressure is 5barG (75psi)
• The
average mesh sizes available are 10, 20, 50 and 120
micron for the complete range. Other micron sizes
are available on request.
 Materials
of Construction
 Cartridges
- Stainless Steel
Nickel Aluminum Bronze
Housings/Bodies
- Stainless
Steel 70/30 Cu Ni
|
